Arrows come in more different styles and varieties than any other piece of archery kit, so it’s important you know all about types of arrows and types of arrow tips and what to use them for. In this article we take you through the different parts of an arrow, the shaft types, point types and vane and fletch types available for both recurve and compound target archers and hunters and some things you need to know before purchasing.
Arrows are normally made up of 4 parts:
|This is the front of the arrow, the bit that hits the target (all being well).
|The stem or body of the arrow connecting the point to the nock and fletch or vanes.
|The (commonly) 3 feathered or plastic vanes at the rear of an arrow to assist with flight.
|The tiny groove on the rear end of the arrow which fits over the string.
Some arrow shafts come with fixed points, some allow different types of point to be glued INTO the shaft, points can also be glued ONTO the shaft and some shafts allow screw in arrow points so that the shaft and point can be added and removed as you like to repurpose the arrow. Normally repurposing an arrow is something that only a hunter would do and target archery arrows more often come with fixed or glue in points.
Used in both target archery and hunting, less destructive than field points. The end of a bullet point is shaped like the end of a bullet, like a pointed dome.
The diameter of the tip of the arrow should be the same or smaller than the diameter of the shaft of the arrow, otherwise this affects the aerodynamics of the arrow and causes it to snag in targets.
Combination points are sharpened and tapered bullet points that can be used in both target archery and hunting. These types of point are more ‘target saving’ when used for target archery as they don’t penetrate as far and wide as a bullet point would.
A flat or blunt arrow point used normally in hunting designed to kill small game by blunt force. Some blunts come with a rubber head that is a larger diameter than the shaft with small spikes, others are just a flat blunt end.
Grabbing Points (JUDO)
A blunt point with small grabbing hooks that is normally used when hunting or practising hunting. When you shoot into leaves, dirt or grass arrows with other types of point have a tendency to bury themselves and become hard to find and retrieve, the grabbing hooks on these points are designed to help the arrow snag on the ground and flip up to make it easy to locate. These points can be expensive.
A sharp tipped arrow point with a built-in barb used for catching fish. with a bow (bowfishing).
Wide flat bladed points that should only be used for hunting. This type of point causes an arrow to fly differently than other types of point as it introduces more surface into the aerodynamics of the arrow. A broadhead is designed to cause large wounds in the target and modern quality broadheads are as sharp as surgical tools.
Different states and different countries and different laws when it comes to what is legal when hunting with broadheads, make sure you look up these laws before you buy and use them.
Incendiary & Explosive Points
Normally only available in Hollywood and used in films such as Rambo and The Hunger Games, unfortunately if you want these types of point you’ll probably have to special order them from somewhere, make them yourself, join the special forces and go rogue or maybe wait for that mad scientist in the dystopian future to invent them…
Alloy Core/Carbon Cover
The most expensive arrows you can buy are made of an alloy core that keeps weight down and adds stiffness, which is then coated with carbon fibre for strength and further stiffness.
Good for: Professional archers, olympians
A carbon arrow shaft that is solid carbon all the way through and made up of many interwoven fibres, this makes it light, but less stiff than an aluminium arrow. A carbon shaft will only bend to a certain degree and after that won’t snap but splinter into many sharp splines. This effect can cause them to be more dangerous when they break.
Good for: Everyone
Aluminium arrows will differ in price and that difference will normally be down to the quality of the manufacturing process.
An aluminium arrow is normally hollow to reduce weight and the spine value on this type of arrow will denote the thickness of the aluminium and diameter of the shaft and also the weight of the arrow.
They are heavier than carbon arrows and normally won’t fly as far or as fast, stiffer and easily breakable, but safer as there is no splintering when they break. They are also easier to cut to size than carbon.
Good for: Beginners
Fibreglass arrows are some of the cheapest arrows available and reside normally at the bottom end of the price range, these are normally used for toys or very cheap low power introductory bow sets.
Good for: Low power bows, toys
Wooden arrows are cheap and disposable. Wood was the material choice of arrows throughout history and is the most basic form of arrow shaft. Traditional shooters and longbow shooters may still use wooden arrows for authenticity but mostly you’ll find them accompanying low power or children’s bows as they break to easily with high power bows. Wooden arrows normally come with feather flights rather than the more durable plastic vanes in modern arrows
Good for: Traditionalist archers, lower power bows, toys, survivalists
All arrows have vanes or fletches, and normally there are 3 spaced equally around the nock end of the arrow. The purpose of fletching on an arrow is to introduce spin and stabilize the flight of the arrow. Some arrows may have 4 vanes to allow for lower profiles and more spin but this is generally reserved for hunters using broadhead points.
3 vs 4 Fletch Arrows
An extra fletch on an arrow can help in several ways. If you want to speed shoot an arrow with 4 fletches has a higher probability of being oriented properly as it is being drawn from the quiver! 4 fletch arrows have a more accurate and smoother flight path than 3 fletch arrows. The downside to the 4 fletch arrow is that it has additional weight and drag through the air which shortens the range.
Vanes can come in packs of different sizes, a full set of 12 arrows would require 36 vanes however vanes often come off or become damaged so purchasing spares is always a good idea.
Feather vanes are exactly that, made from the flight feathers of (usually) a Turkey wing. Feathers are less durable than plastic vanes and prone to becoming waterlogged. However due to their forgiveness when contacting against bow rests and risers they are the favorite of indoor olympic archers.
Best for: Indoor use by everyone
Plastic vanes are stiffer than feather vanes and the favorite of Olympic outdoor archers. They can be purchased in varying profiles with low-profile vanes introducing less wind-drift than higher profile ones. Plastic vanes are also waterproof and suffer none of the issues of feather vanes when shooting in the rain.
Best for: Outdoor and indoor use by everyone
Shaped Vanes/Spin Wings
Arrow vanes can be curved shaped so that if you look at them from the back they resemble the blades of a fan, this causes the arrow more inflight spin which adds to stability. This type of fletching is more expensive than regular straight vanes and can be difficult to apply and easily broken.
Mostly these are used at competitive archery level and generally they are only ever used on recurve bows as compound bows can rip them off.
Best for: Olympians, competitors, experienced archers, serious enthusiasts
Nocks are the small (usually plastic) ends of the arrow that are are grooved to allow locating the bowstring on the end of the arrow before shooting.
Some nocks can be glued onto the arrow, some can be glued into the arrow and some, like points, can be threaded into the arrow shaft and removed again, and some have manufacturer specific fitting which will only work with that manufacturers arrow, picking the right type of nock is normally determined by the type of arrow shaft you are using.
Beginners Buying Guide
Once you know your arrow length, if you’re a target archer you’ll ideally want the lightest and smallest arrows you can shoot. A hunter will make a different decision based on the need for the arrow to penetrate into prey, however target archery only requires the arrow to stick into the target. We’ve rounded up some of the best arrows available in these 2 guides one for hunters and one for target archers.
Your arrows MUST be long enough otherwise you run the risk of drawing back too far and your arrow falling off the rest and potentially shooting somewhere you just didn’t intend for it to go.
Arrows will normally come in batches of 10 or 12 as purchasing a batch will mean you are getting 10 or 12 arrows produced at the same time on the same machinery which will allow for less inconsistency between their makeup. Although that tiny level of difference will only matter to a very experienced archer it’s useful to understand just why you see arrows offered in batches in stores rather than sold individually.
Ready To Use Arrows vs Buying Points/Shafts/Nocks & Fletchings
You can either buy ready to use arrows OR you can purchase the component parts individually and assemble them yourself. Ready made arrows can be cheaper than the sum of their component parts purchased individually but allow for less personalization. As a novice archer ready to use arrows should be your preferred choice.